Run your site through a full year of wind and sun with 64 real electrolysers. Every number labelled, every assumption you need to prove next.
First project and PDF report free. No credit card.
20 MW electrolyser · 40 MW solar · 30 MW wind · off-grid · H2Hub default costs
Next step
Electricity is 57% of the cost, the biggest driver. Get a power price quote: at $39.88/MWh or less (vs $45 assumed) this run meets the $4.00/kg target.
Modelled for one sample project under stated assumptions. The $4.00/kg target is an example input, not a market price. An illustration, not a prediction for your project.
Compare models on your project →Screening estimates, not quotes. Disclaimer
Most early hydrogen ideas fail on power price, utilisation or scale. Seeing that in an afternoon — with the assumption that broke it written down — is worth more than finding out after a paid feasibility study.
Results depend on your site, weather and costs — the order changes from project to project.
Assumptions: West Texas site · ERA5 2025 weather · 20 MW electrolyser · 40 MW solar · 30 MW wind · off-grid · H2Hub default capex
| Model | Technology | Delivered cost | Vendor figures source |
|---|---|---|---|
| Alkaline model A | Alkaline | $4.26/kg Result | Published manufacturer data · checked 2026-11-05 |
| Alkaline model B | Alkaline | $4.37/kg Result | Published manufacturer data · checked 2026-11-05 |
| PEM model A | PEM | $5.45/kg Result | Published manufacturer data · checked 2026-11-05 |
| PEM model B | PEM | $5.39/kg Result | Published manufacturer data · checked 2026-11-05 |
Models anonymised on this page. Named models, with full sources, are in the electrolyser library.
Modelled results under these assumptions, not a ranking or endorsement. Vendor figures are published values, not guarantees.
A datasheet gives efficiency at full load on a perfect day. Your plant follows the wind and sun. H2Hub takes each model's published figures and runs it hour by hour against your resource, then shows cost per kilogram, output, starts and stack replacement — on the same site, so the comparison is fair.
Every figure links to the maker's datasheet, with an A/B/C source grade and warnings where a figure is stack-only or unclear.
Only whole-system figures enter the simulation; stack or DC figures are shown but H2Hub's reference is used, and the page says which.
Up to 4 models compared on your project, with the reasons quoted from the numbers.
$149/month. Renews automatically until you cancel. Cancel online in one step.
Projects stalled on power cost, utilisation and buyers. H2Hub tests those first.
See how much of your cost is electricity, and the breakeven power price your project needs.
8,760 hours against your site's wind and solar. Nameplate is not output.
Delivered cost by route, and the price at which nearby buyers would actually switch.
| Included | Free | Professional | Developer |
|---|---|---|---|
| Browse electrolyser library | ✓ | ✓ | ✓ |
| Projects | 1 | 3 | Unlimited |
| Model runs | 1 project · original inputs | 20/month | Unlimited |
| PDF report | ✓ | ✓ | ✓ |
| Compare PEM vs alkaline vs SOEC | — | — | ✓ |
| Compare up to 4 vendor models on your site | — | — | ✓ |
| PPT and CSV exports | — | — | ✓ |
Free includes the first project's PDF, locked to original inputs; same-input re-downloads allowed. Professional runs reset each calendar month (UTC).
$149/month. Renews automatically until you cancel. Cancel online in one step.
Know whether your project deserves a feasibility study, and which assumption to fix first.
Screen a projectShow customers what your equipment means at their site — hourly dispatch on your published specs, in a report they can check.
Talk to us about a vendor editionRebuild a sponsor's case in an hour. Leave with sharper questions.
See the analyst guideStart with a location and a rough scale. Leave knowing whether to advance, redesign or pause.
Location, product and scale. Unknowns are labelled, not guessed.
8,760-hour dispatch with NASA POWER / ERA5 data at your coordinates.
Power vs. capital, and which input needs a real quote first.
Every number tagged, with a checklist of what would strengthen it.
Four tests plus breakeven power price and utilisation.
Electrolyser size, wind–solar mix and delivery route, side by side.
A roadmap and PDF naming the conversation that matters next.
Adjust the four inputs that drive hydrogen cost. This is the same economics logic used inside the workspace in a simplified screening estimate with fixed indicative assumptions, without site data or hourly dispatch.
In the workspace, this is calculated from your site's hourly wind and solar data, not assumed.
Indicative range $4.83–$7.11/kg at this configuration.
Indicative range shown. Fixed assumptions: no site data, no delivery cost, no stress tests. See assumptions & limitations
This is a simplified annual plant-gate estimate, not the workspace's hourly dispatch result. Your four inputs control capacity, assumed load factor, power price and electrolyser capital cost.
Fixed indicative model defaults cover financing, project lifetime, system electricity consumption, lifetime performance allowance, balance-of-plant capital and annual fixed operating costs. They are not site evidence or vendor quotations. System electricity consumption is not a stack-only efficiency figure.
The cost result combines annualised capital, fixed operating and electricity costs per kilogram of estimated hydrogen output. The displayed range is a screening sensitivity allowance, not a confidence interval or a P50/P90 forecast.
No site resource data, hourly dispatch, separately priced water, delivery, taxes, incentives or project-specific stack-replacement schedule is included. Check these in your full project before relying on a cost comparison.
H2Hub model defaults · 2026 · USD · electrolyser package plus separate BoP; not an EHO installed-cost quotation. Homepage BoP allowance differs from the full workspace; this simplified estimate does not claim EHO scope.
| Technology | Stack | Balance of plant | Other utilities | Other CAPEX | Total installed |
|---|---|---|---|---|---|
| Alkaline | €290.18/kW | €622.59/kW | €622.59/kW | €539.94/kW | €2075.30/kW |
| PEM | €493.77/kW | €567.44/kW | €607.79/kW | €527.10/kW | €2196.10/kW |
Four-category installed scope, not stack-only or stack plus BoP. Reference currency stays EUR; not converted into project inputs. Workbook values supplied by the project owner.
These defaults are H2Hub modelling assumptions, not project tariffs or independently confirmed performance. The first full project lets you develop a site-specific case and record its evidence.
No credit card. Nothing renews.
Start with your free project. Professional is $79/month for 3 projects and 20 monthly runs; Developer is $149/month for ongoing modelling, saved comparisons and exports. Existing subscribers keep their price and benefits.
Compare free and DeveloperWe'll send the estimate and its assumptions. Tick the box if you also want occasional H2Hub updates.
Preliminary model result. Results are estimates derived from your inputs, stated assumptions and third-party data. Actual project economics may differ materially. This is project-economics analysis, not personalised investment advice or a lender term sheet.
Every number is labelled as an input, a benchmark, a published source or a calculated result. We tell you where our model stops.
A good result isn't a green light. It's a list of what to prove next.
Read the methodologyH2Hub is a product of ReneEnergy, the trading name of SwitchtoSolar Online Marketing LLC. Company information, payment policies and our approach to protecting your project data are available below.
ReneEnergy develops and maintains H2Hub. H2Hub is a product of ReneEnergy, the trading name of SwitchtoSolar Online Marketing LLC. Alex N. Waithera is the founder of ReneEnergy and H2Hub.
Company & founderRead how project information is handled, our privacy policy and the limits of our analysis. These are our own disclosures, not independent security certifications.
Subscriptions are processed through Stripe. Recurring subscriptions renew until cancelled; cancellation is available online in your account. Using Stripe does not constitute an endorsement or certification of H2Hub.
No independent customer-review profile or earned business or security certification is listed here at present. Internal model tests are not third-party certification.
$79/month
Full Intelligence, all courses, 3 saved projects and 20 model runs per month. PDF reports included. For research and occasional screening. Browse the electrolyser library.
Renews automatically until you cancel. Cancel online in one step.
$149/month
Everything in Professional, plus electrolyser comparisons: PEM vs alkaline vs SOEC and up to four vendor models on your own site. Unlimited projects and reruns. PDF, PPT and CSV exports.
Renews automatically until you cancel. Cancel online in one step.
from $5,000/yr
Shared seats, your equipment preloaded, branded reports for your customers, API access.
Talk to usExisting subscribers keep their current price and benefits while continuously subscribed—including $15.99/month, $175/year, $49/month and $490/year. New plans are monthly. Professional’s 20-run allowance resets on the first of each month (UTC). Cancelling or lapsing means resubscribing at the current offer.
A location and a rough size are enough to start.
Screen my project — free